Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Pacifica, CA

Patio Cleaning for Pavers in Pacifica, CA

Pressure wash with a surface cleaner for pavers. Patio cleaning for concrete, pavers and natural stone, with the pressure and cleaner matched to the material. Typical cost $150-$400.

Patio Cleaning for Pavers is one of the jobs we do most often in Pacifica, CA. Typical jobs cost $150-$400, and you approve the price before we begin. On pavers, the method we use is pressure wash with a surface cleaner.

The right method for the job

Pressure wash with a surface cleanerCleaning method
Usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possiblePressure

Cleaning solution: A paver cleaner or pre-treatment; efflorescence needs a dedicated cleaner.

Cleaning pavers safely

Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them. Re-sanding the joints, often with polymeric sand, and sealing afterward keeps weeds and ants out and holds the pavers in place.

Avoid: A narrow tip aimed into the joints, which blows out sand and can loosen pavers.

How often: Clean every 1-2 years; reseal every 2-4 years.

When to book patio cleaning for pavers

  • Green or black growth between pavers or on shaded concrete
  • Grease spots near the grill
  • Stains from planters, leaves and furniture
  • Weeds in the joints
  • White chalky haze on pavers or stone

Why it gets dirty

  • Shade and damp soil around the patio
  • Cooking grease and food spills
  • Rust from metal furniture and planters
  • Efflorescence (salts) rising out of masonry

Easy upkeep between cleanings

  • Move planters now and then so they don't leave rings
  • Clean grill grease quickly with dish soap and hot water
  • Pull weeds from joints before they spread
  • Sweep often so leaves don't stain

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Blowing joint sand out of pavers
  • Etching or pitting soft stone like travertine and sandstone
  • Acid cleaners on limestone and travertine
  • Stripping an existing sealer unevenly

How we handle patio cleaning for pavers

  1. Check the patio material and any sealer
  2. Move furniture and protect nearby plants
  3. Pre-treat growth, grease and stains
  4. Clean with the right pressure and tools
  5. Rinse, re-sand joints if needed, and walk the patio with you

How much does patio cleaning for pavers cost?

$150-$400Typical range for a typical backyard patio
1-2 hoursTypical time on site
Once a year, more often in shadeRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for pavers

Local patio cleaning for pavers for Pacifica, CA

Driveways and patios in California collect oil, dust and tire marks over the long dry season. Cleaning with a surface cleaner and controlling the wash water keeps it out of storm drains.

Some cities in California limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.

Crews serve all of Pacifica (ZIP code 94044), plus San Bruno (4.3 mi), Broadmoor (5 mi), South San Francisco (5.2 mi) and Montara (5.2 mi). Call (555) 010-0000 for a free quote in Pacifica.

Patio Cleaning for Pavers: frequently asked questions

How much does patio cleaning for pavers cost in Pacifica, CA?

Patio Cleaning for Pavers typically costs $150-$400 for a typical backyard patio, and usually takes 1-2 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for patio cleaning for pavers?

For pavers: usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possible. What we avoid: a narrow tip aimed into the joints, which blows out sand and can loosen pavers. We keep the pressure even and controlled, with the right tools for the surface.

Is patio cleaning for pavers safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule patio cleaning for pavers?

Clean every 1-2 years; reseal every 2-4 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Pacifica, CA

Soft Washing for Metal Roofs

Soft wash. Painted metal roofs collect dirt, mildew and oxidation chalk.

Typical $300-$800

House Washing for Vinyl Siding

Soft wash. Vinyl is the most common siding in the U.S.

Typical $300-$700

Sidewalk & Walkway Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $100-$250

Commercial Pressure Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $400-$2,000

Exterior Mold & Mildew Removal for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $250-$700

Driveway Cleaning for Asphalt

Low-to-moderate pressure wash. Asphalt is softer than concrete and is held together by its binder, so it is washed at lower pressure.

Typical $150-$400

Commercial Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $400-$2,000

Deck Cleaning for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $250-$600

Pressure Washing for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $150-$600

Sidewalk & Walkway Cleaning for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $100-$250

Efflorescence Removal

Removing white, chalky salt deposits from brick, pavers, concrete and stone.

Typical $200-$600

Rust Stain Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$500

Ready for a cleaner home or business?

Get a free pressure washing quote in Pacifica, CA. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote